Century 3200 Offshore Rochester NY

The Century 3200 Offshore, a good-looking boat with nice lines and an eye-catching deep-powder-blue hull, is the first in a new line of 3200 Offshore models. Based on the builder's biggest hull (there's also a center console and a walkaround), the 3200 Offshore is designed to fish and cruise and is well equipped to do both.

Oak Orchard Canoe & Kayak
(585) 288-5550
1350 Empire Blvd
Rochester, NY
Services
Oak Orchard Canoe & Kayak

Data Provided by:
Navy Point Marine Steson Sie
(585) 266-3980
Rochester, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Allens Canalside Marine Inc
(585) 426-5400
416 Elmgrove Rd
Rochester, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

McMillan Marine
(585) 288-2180
1070 Empire Boulevard
Rochester, NY
 
Medical Seapak Company
(585) 266-3136
1945 Ridge Rd E
Rochester, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Bayside Boat & Tackle
(585) 224-8289
1350 Empire Boulevard
Rochester, NY
 
Canvas Maam Limited
(585) 544-7150
70 Pattonwood Dr
Rochester, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Sutters Marine
(585) 482-4112
512 Bay St # S
Rochester, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Smith Boys Of Rochester
(585) 467-4020
55 Marina Drive
Rochester, NY
 
Rochester Area Model Yacht Assn
(585) 360-4715
501 Rivers Run
Rochester, NY
 
Data Provided by:

Century 3200 Offshore

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Century 3200 Offshore, a good-looking boat with nice lines and an eye-catching deep-powder-blue hull, is the first in a new line of 3200 Offshore models. Based on the builder's biggest hull (there's also a center console and a walkaround), the 3200 Offshore is designed to fish and cruise and is well equipped to do both. It has a long list of fishing features, as well as comfortable accommodations that could stand comparison to those of a typical express cruiser of the same size. Compared to a center console, there's less overall deck space for fishing (though the cockpit is very roomy), but there's also a number of creature comforts that will get a nod from the rest of the family. The Century 3200 is capable of providing the family and fishing buddies with a good fishboat and a very comfortable weekender (or week-longer).

Construction
The Century 3200 Offshore starts with a 3 oz. skin coat of chop wet out in premium vinylester resin to help prevent osmotic blistering in the bottom and reduce print through in the hullsides. The bottom strakes are filled with fiberglass and a matrix of resin mixed with angel hair fiber (for sharp bottom strake edges, which improves waterflow separation and reduces drag), and a syntactic print blocker is also sprayed on the hull sides to prevent print through. The bottom is sold knit (vs. woven) fiberglass, while the sides are cored with end-grain balsa for added stiffness. The hull is supported by a one-piece flanged fiberglass grid that is bonded to the hull and supports the deck above. The transom is cored with a 1.5 in.-thick high-density foam sandwiched in fiberglass. The hull-to-deck joint is bonded with adhesive and fastened with self-tapping screws, which, structurally speaking, basically clamp the fiberglass together until the adhesive sets up. Decks are cored with T-90 foam of varying densities, depending on location, to add stiffness at lighter weight, while providing better holding for fasteners. ...

Click here to read the rest of the article at JDPower.com