Century 3200 Offshore Watertown NY

The Century 3200 Offshore, a good-looking boat with nice lines and an eye-catching deep-powder-blue hull, is the first in a new line of 3200 Offshore models. Based on the builder's biggest hull (there's also a center console and a walkaround), the 3200 Offshore is designed to fish and cruise and is well equipped to do both.

St Lawrence Propeller Company
(315) 639-6000
Watertown, NY
Services
Parts, Aftermarket Accessories, Supplies, Storage

Navy Point Marine
(315) 646-3364
500 W Main St
Watertown, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Adams Chaumont Bay Marina
(315) 649-5050
11599 Circle Dr
Chaumont, NY
 
Weather Stopper Custom Marine Canvas
(315) 686-4392
692 Riverside Dr
Clayton, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Meyers Marine
(315) 686-4734
328 Rivershore Dr
Clayton, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

West Marine
(315) 788-8490
21214 Pioneer Plaza Dr
Watertown, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Chaumont Bay Marina
(315) 649-5050
11599 Circle Dr
Chaumont, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Magee Geordie Canvas Company
(315) 649-5018
12037 County Route 125
Chaumont, NY
Services
Parts, Aftermarket Accessories, Supplies, Storage

Chalks Marina & Boat Sales LLC
(315) 686-5622
18221 Reed Point Road
Fishers Landing, NY
 
Bayside Marina
(315) 686-2121
1045 State St
Clayton, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Century 3200 Offshore

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Century 3200 Offshore, a good-looking boat with nice lines and an eye-catching deep-powder-blue hull, is the first in a new line of 3200 Offshore models. Based on the builder's biggest hull (there's also a center console and a walkaround), the 3200 Offshore is designed to fish and cruise and is well equipped to do both. It has a long list of fishing features, as well as comfortable accommodations that could stand comparison to those of a typical express cruiser of the same size. Compared to a center console, there's less overall deck space for fishing (though the cockpit is very roomy), but there's also a number of creature comforts that will get a nod from the rest of the family. The Century 3200 is capable of providing the family and fishing buddies with a good fishboat and a very comfortable weekender (or week-longer).

Construction
The Century 3200 Offshore starts with a 3 oz. skin coat of chop wet out in premium vinylester resin to help prevent osmotic blistering in the bottom and reduce print through in the hullsides. The bottom strakes are filled with fiberglass and a matrix of resin mixed with angel hair fiber (for sharp bottom strake edges, which improves waterflow separation and reduces drag), and a syntactic print blocker is also sprayed on the hull sides to prevent print through. The bottom is sold knit (vs. woven) fiberglass, while the sides are cored with end-grain balsa for added stiffness. The hull is supported by a one-piece flanged fiberglass grid that is bonded to the hull and supports the deck above. The transom is cored with a 1.5 in.-thick high-density foam sandwiched in fiberglass. The hull-to-deck joint is bonded with adhesive and fastened with self-tapping screws, which, structurally speaking, basically clamp the fiberglass together until the adhesive sets up. Decks are cored with T-90 foam of varying densities, depending on location, to add stiffness at lighter weight, while providing better holding for fasteners. ...

Click here to read the rest of the article at JDPower.com