Chaparral 256 SSI Bowrider Bronx NY
Jack's Bait & Tackle
New York, NY
Aamcar Discount Car Rentals
NY Yacht and Boat Charter
City of New York: Boat Rentals Wollman Rink
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage
City Island Sailing School
New York, NY
Yacht For All Seasons Inc
Shoreway Marine Inc
Parts, Aftermarket Accessories, Supplies, Storage
Chaparral 256 SSI Bowrider
Click here for more content from JDPower.com
The Chaparral 256 SSI Bowrider is a good-looking boat marked by innovation, sleek lines and a decided practical streak, and offers a great ride and snappy performance. Creature comforts include a head compartment with sink, plenty of storage space in some surprising places and a big sun pad aft. An all-day boat with a lot to offer, the 256 manages to stand out in a crowded, highly competitive field.
The Chaparral 256 SSI Bowrider starts with gelcoat and then a 30-mil. coat of vinylester sprayed on to help prevent osmotic blistering. The bottom laminate is solid fiberglass, starting with chop and then fiberglass reinforcements. In the hull sides, there is a 90-mil. layer of SprayCore"this spray-on bulking agent helps prevent print-through of the follow-on fiberglass reinforcement to the gelcoat surfaces, which is especially important with colored hulls. The hull sides are built of solid fiberglass laminates over the SprayCore. The transom is a solid sandwich composite of fiberglass and pressure-treated plywood. Chaparral takes care to prevent bulkhead-edge hard spots in the hull skin by padding the plywood edges with strips of 1/2-in. NydaCore coring, and then tabbing the bulkheads to the hull.
The bottom of the hull is supported by a pressure-treated plywood stringer grid network that's tabbed to the bottom, then is fully encapsulated in fiberglass. The one-piece cockpit deckliner is in turn bonded to the structural grid, making for a solidly constructed hull. The hull-to-deck joint is fastened mechanically using self-tapping screws through the shoebox joint, which is backed up by a strip of pressure-treated plywood for improved screw grip and retention. Structural bulkheads at the anchor locker and forward of the engine room are also fiberglassed to the hull-to-deck joint area. The outer edge of the joint is then sealed with a caulking compound. ...
Click here to read the rest of the article at JDPower.com