Cutting and Polishing Granite New York NY

The Greeks were the first to use stones to make homes. The procedure of acquiring natural stone has not changed much since then.

Gotham Builders
(800) 444-4923
203- 20 Rocky Hill Road
Bayside, NY

Data Provided by:
Uvs Construction
(718) 554-0426
Beach 74Th St
Arverne, NY

Data Provided by:
ContiGroup
(212) 207-5100
277 Park Avenue
New York, NY
 
Gold and Silver Home Care
(212) 685-5750
316 5th Avenue
New York, NY
 
A Fg Construction Management Inc
(212) 897-2674
450 7th Ave
New York, NY
 
Van Go General Contracting
(201) 387-9013
326 So. Washington Ave
Bergenfield, NJ

Data Provided by:
Just Real Construction
(646) 319-3470
1349 East 38th street
Brooklyn, NY
 
American Construction Corp
(212) 229-5200
44 W 18th St
New York, NY
 
Alpha Construction Group Inc
(212) 868-5515
115 W 29th St
New York, NY
 
Home Helper Agency
(212) 768-9759
165 W. 46th Street
New York, NY
 
Data Provided by:

Cutting and Polishing Granite

Provided By:

Author: yangxp

The Greeks were the first to use stones to make homes. The procedure of acquiring natural stone has not changed much since then. In modern days too big blocks of stone are cut from the mines and then sold in thin pieces or slabs. After buying these slabs, they are polished and shaped according to usage. For the granite stone too this process is followed.

Over the years the main method has remained the same but to perform the steps the type of machineries used has changed drastically. Science has transformed the old machines into much more effective and time saving types. Three basic machines are used in granite fabrication. These are saws, polishers and routers.

Saws

Block saw or gang saw cuts the stone blocks into slabs. Nowadays diamond wire saw is used for cutting. The machine has a wire and on the wire a commercial diamond is fixed. Diamond itself is the hardest stone. So it makes the job much quicker. Then a bridge saw is used to give the slabs proper size.

Polishers

Polishers are used to make the surface of the granite smooth. Polishers make the surface of the granite mirror like. An abrasive material is attached with the rotating pads of the polisher. The surface of the material varies according to purpose. The smoothness of the polishing increases with the fineness of the abrasive material.

Routers

Routers are used to create designs on the slab surface. There are various edges that are used in the router to create different designs. Router has a spinning blade fixed with diamonds to cut and create the required designs.

 

 


About the Author:

yuxiang granite tile,mosaic tile and marble tile

Article Source: http://www.articlesbase.com/diy-articles/how-to-cut-and-polish-granite-810136.html

Local Events

Long Island Building & Facility Maintenance Show
Dates: 5/5/2009 – 5/8/2020
Location:
David S. Mack Sports & Exhibition Complex - Hofstra University Hempstead
View Details