G3 1756 SC Panfish Ithaca NY

The G3's 1756 SC Panfish is rated for 70 hp and can carry up to 5 passengers or 1,170 lbs. total passengers, motor and cargo. The boat is available as side console (SC) or center console models.

Mc Pherson Sailing Products Inc
(607) 272-6944
730 Willow Ave
Ithaca, NY
Services
Parts, Aftermarket Accessories, Supplies, Storage

Midlakes Marine Storage Inc
(607) 277-6990
3041 Wilkins Rd
Ithaca, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Don Cooks Outboard Repair
(607) 533-7595
97 Armstrong Rd
Lansing, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

H M Marine Tech International
(716) 298-5562
1575 Military Rd
Newfield, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Seveys Boatyard Inc
(315) 496-2092
6510 Glencove Rd
Moravia, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Johnsons Boat Yard
(607) 272-5191
101 Pier Rd
Ithaca, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Cayuga Wooden Boatworks
(607) 272-1581
435 Old Taughannock Boulevard
Ithaca, NY
 
Marine Trade Association Of Western N Y
(716) 284-1010
305 4Th St
Newfield, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Bear Creek Appaloosas
(315) 496-2092
Glen Cove Road
Moravia, NY
 
Dunham'S Marine
(607) 546-2121
5398 Peach Orchard Pt
Hector, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

G3 1756 SC Panfish

Provided by:

Click here for more content from JDPower.com

Model Introduction
The G3 1756 SC Panfish is a tough little low-maintenance, easy-to-own aluminum boat, designed for no-frills use by sportsmen on protected waters including small lakes and rivers. The boat is popular with a wide variety of hunters and fishermen"deer hunters needing a way to get to favorite hunting spots up river, gator hunters in the Everglades, turkey hunters in the Plains states, and shark fishermen off the coast of Florida. Simple and stoutly built, the 1756 is part of a series of welded aluminum jon boats from 14 to 18 ft.

The G3's 1756 SC Panfish is rated for 70 hp and can carry up to 5 passengers or 1,170 lbs. total passengers, motor and cargo. The boat is available as side console (SC) or center console models.

Construction
The hull is built of welded .1 in. aluminum with a stamped-in keel for added hull stiffness and improved tracking. The hull is supported by extruded aluminum ribs and frames with reinforced transom and corner bracing. The aluminum floor has a diamond tread pattern for anti-slip properties, and it's powder coated for durability""one shouldn't ever have to paint this boat for cosmetic reasons. Between the hull and the deck is foam, designed to provide upright floatation in the event the boat is swamped. A transom drain hole with plug helps drain the deck when the boat is on the trailer, or in the water and running at speed. The boat has a built-in gas tank and is pre-wired for a trolling motor in the bow. ...

Click here to read the rest of the article at JDPower.com