G3 1756 SC Panfish Rochester NY

The G3's 1756 SC Panfish is rated for 70 hp and can carry up to 5 passengers or 1,170 lbs. total passengers, motor and cargo. The boat is available as side console (SC) or center console models.

Oak Orchard Canoe & Kayak
(585) 288-5550
1350 Empire Blvd
Rochester, NY
Services
Oak Orchard Canoe & Kayak

Data Provided by:
Bayside Boat & Tackle
(585) 224-8289
1350 Empire Boulevard
Rochester, NY
 
McMillan Marine
(585) 288-2180
1070 Empire Boulevard
Rochester, NY
 
Smith Boys Of Rochester
(585) 467-4020
55 Marina Drive
Rochester, NY
 
Bryce Marine
(585) 352-9485
1682 Manitou Rd.
Rochester, NY
 
Sutters Marine
(585) 482-4112
512 Bay St # S
Rochester, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Canvas Maam Limited
(585) 544-7150
70 Pattonwood Dr
Rochester, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Allens Canalside Marine Inc
(585) 426-5400
416 Elmgrove Rd
Rochester, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Navy Point Marine Steson Sie
(585) 266-3980
Rochester, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Rochester Area Model Yacht Assn
(585) 360-4715
501 Rivers Run
Rochester, NY
 
Data Provided by:

G3 1756 SC Panfish

Provided by:

Click here for more content from JDPower.com

Model Introduction
The G3 1756 SC Panfish is a tough little low-maintenance, easy-to-own aluminum boat, designed for no-frills use by sportsmen on protected waters including small lakes and rivers. The boat is popular with a wide variety of hunters and fishermen"deer hunters needing a way to get to favorite hunting spots up river, gator hunters in the Everglades, turkey hunters in the Plains states, and shark fishermen off the coast of Florida. Simple and stoutly built, the 1756 is part of a series of welded aluminum jon boats from 14 to 18 ft.

The G3's 1756 SC Panfish is rated for 70 hp and can carry up to 5 passengers or 1,170 lbs. total passengers, motor and cargo. The boat is available as side console (SC) or center console models.

Construction
The hull is built of welded .1 in. aluminum with a stamped-in keel for added hull stiffness and improved tracking. The hull is supported by extruded aluminum ribs and frames with reinforced transom and corner bracing. The aluminum floor has a diamond tread pattern for anti-slip properties, and it's powder coated for durability""one shouldn't ever have to paint this boat for cosmetic reasons. Between the hull and the deck is foam, designed to provide upright floatation in the event the boat is swamped. A transom drain hole with plug helps drain the deck when the boat is on the trailer, or in the water and running at speed. The boat has a built-in gas tank and is pre-wired for a trolling motor in the bow. ...

Click here to read the rest of the article at JDPower.com