G3 1756 SC Panfish Watertown NY

The G3's 1756 SC Panfish is rated for 70 hp and can carry up to 5 passengers or 1,170 lbs. total passengers, motor and cargo. The boat is available as side console (SC) or center console models.

West Marine
(315) 788-8490
21214 Pioneer Plaza Dr
Watertown, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Navy Point Marine
(315) 646-3364
500 W Main St
Watertown, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Magee Geordie Canvas Company
(315) 649-5018
12037 County Route 125
Chaumont, NY
Services
Parts, Aftermarket Accessories, Supplies, Storage

Northern Marine Repr Service
(315) 686-4398
16782 Stern Dr
Clayton, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Chalks Marina & Boat Sales LLC
(315) 686-5622
18221 Reed Point Road
Fishers Landing, NY
 
St Lawrence Propeller Company
(315) 639-6000
Watertown, NY
Services
Parts, Aftermarket Accessories, Supplies, Storage

Chaumont Bay Marina
(315) 649-5050
11599 Circle Dr
Chaumont, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Adams Chaumont Bay Marina
(315) 649-5050
11599 Circle Dr
Chaumont, NY
 
R J Marine Associates Limited
(315) 686-9805
690 Riverside Dr
Clayton, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Clayton Marina Sales and Service, Inc.
(315) 686-3378
50 State Street
Clayton, NY
 

G3 1756 SC Panfish

Provided by:

Click here for more content from JDPower.com

Model Introduction
The G3 1756 SC Panfish is a tough little low-maintenance, easy-to-own aluminum boat, designed for no-frills use by sportsmen on protected waters including small lakes and rivers. The boat is popular with a wide variety of hunters and fishermen"deer hunters needing a way to get to favorite hunting spots up river, gator hunters in the Everglades, turkey hunters in the Plains states, and shark fishermen off the coast of Florida. Simple and stoutly built, the 1756 is part of a series of welded aluminum jon boats from 14 to 18 ft.

The G3's 1756 SC Panfish is rated for 70 hp and can carry up to 5 passengers or 1,170 lbs. total passengers, motor and cargo. The boat is available as side console (SC) or center console models.

Construction
The hull is built of welded .1 in. aluminum with a stamped-in keel for added hull stiffness and improved tracking. The hull is supported by extruded aluminum ribs and frames with reinforced transom and corner bracing. The aluminum floor has a diamond tread pattern for anti-slip properties, and it's powder coated for durability""one shouldn't ever have to paint this boat for cosmetic reasons. Between the hull and the deck is foam, designed to provide upright floatation in the event the boat is swamped. A transom drain hole with plug helps drain the deck when the boat is on the trailer, or in the water and running at speed. The boat has a built-in gas tank and is pre-wired for a trolling motor in the bow. ...

Click here to read the rest of the article at JDPower.com