G3 Eagle 175 PF Rochester NY

The G3 Eagle 175 PF, positioned in the middle of the brand's 15- to 19-ft. Eagle modified-vee series of fishing boats, is a rugged, utilitarian sportsman's boat with more than a few civilized features.

Oak Orchard Canoe & Kayak
(585) 288-5550
1350 Empire Blvd
Rochester, NY
Services
Oak Orchard Canoe & Kayak

Data Provided by:
Navy Point Marine Steson Sie
(585) 266-3980
Rochester, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Smith Boys Of Rochester
(585) 467-4020
55 Marina Drive
Rochester, NY
 
Allens Canalside Marine Inc
(585) 426-5400
416 Elmgrove Rd
Rochester, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Rochester Area Model Yacht Assn
(585) 360-4715
501 Rivers Run
Rochester, NY
 
Sutters Marine
(585) 482-4112
512 Bay St # S
Rochester, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

McMillan Marine
(585) 288-2180
1070 Empire Boulevard
Rochester, NY
 
Bayside Boat & Tackle
(585) 224-8289
1350 Empire Boulevard
Rochester, NY
 
Canvas Maam Limited
(585) 544-7150
70 Pattonwood Dr
Rochester, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Bryce Marine
(585) 352-9485
1682 Manitou Rd.
Rochester, NY
 
Data Provided by:

G3 Eagle 175 PF

Provided by:

Click here for more content from JDPower.com

Model Introduction
The G3 Eagle 175 PF, positioned in the middle of the brand's 15- to 19-ft. Eagle modified-vee series of fishing boats, is a rugged, utilitarian sportsman's boat with more than a few civilized features. Specifically designed for the crappie fisherman, the boat includes a baitwell, 2 livewells, lockable rod storage and tackle storage forward. The deck is low in the boat compared to similar fishing boats with raised casting platforms fore and aft, making this 175 PF an especially good choice as a small family boat, or one that will be used by passengers of all ages. The Eagle 175 PF is rated to carry 4 passengers or 1,000 lbs. total passengers, gear and engine.

Construction
The G3 Eagle 175 PF's hull is built of welded .1 in. aluminum with a stamped-in keel and full-length aluminum longitudinals for added hull stiffness, and running strakes in the bottom are added for improved tracking. The hull is supported by extruded aluminum ribs and frames with reinforced transom and corner bracing. The pressure-treated plywood deck is covered with 18-oz. marine-grade carpeting. Foam is injected between the hull and the deck to provide upright floatation in the event the boat is swamped. A transom drain hole with plug helps drain the deck with the boat on its trailer. The boat has a built-in 13-gal. gas tank and comes with a 12-volt trolling motor in the bow.

The hull is painted with a tough baked-on, 2-part urethane metallic finish that is very resistant to scratching and fading from exposure to sunlight. Color options are Firemetal Red or Gunmetal Blue, and graphics are also available. ...

Click here to read the rest of the article at JDPower.com