G3 Eagle 175 PF Utica NY

The G3 Eagle 175 PF, positioned in the middle of the brand's 15- to 19-ft. Eagle modified-vee series of fishing boats, is a rugged, utilitarian sportsman's boat with more than a few civilized features.

ASI Environmental
(315) 735-1777
408 1st Street
Utica, NY
 
Utica Boat Service
(315) 736-5520
5164 Commercial Drive East
Yorkville, NY
 
Garret Gallery
(315) 853-8145
7825 State Route 5
Clinton, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Express Marine
(315) 337-5720
6787 Martin St
Rome, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Disano's Creative Canvas
(315) 797-3040
701 Saratoga St
Utica, NY
 
Island Marine Canvas
(516) 825-3561
72 Rockaway Ave
Utica, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Bikes & Boards at Surf 'n Ski
(315) 768-1190
4480 Commercial Dr
New Hartford, NY
 
Bielejec Edward H
(315) 896-4421
8196 State Route 12
Barneveld, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Riverside Marine
(315) 337-5170
6787 Martin St
Rome, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Boats Unlimited
(315) 735-1777
408 1st St
Utica, NY
 

G3 Eagle 175 PF

Provided by:

Click here for more content from JDPower.com

Model Introduction
The G3 Eagle 175 PF, positioned in the middle of the brand's 15- to 19-ft. Eagle modified-vee series of fishing boats, is a rugged, utilitarian sportsman's boat with more than a few civilized features. Specifically designed for the crappie fisherman, the boat includes a baitwell, 2 livewells, lockable rod storage and tackle storage forward. The deck is low in the boat compared to similar fishing boats with raised casting platforms fore and aft, making this 175 PF an especially good choice as a small family boat, or one that will be used by passengers of all ages. The Eagle 175 PF is rated to carry 4 passengers or 1,000 lbs. total passengers, gear and engine.

Construction
The G3 Eagle 175 PF's hull is built of welded .1 in. aluminum with a stamped-in keel and full-length aluminum longitudinals for added hull stiffness, and running strakes in the bottom are added for improved tracking. The hull is supported by extruded aluminum ribs and frames with reinforced transom and corner bracing. The pressure-treated plywood deck is covered with 18-oz. marine-grade carpeting. Foam is injected between the hull and the deck to provide upright floatation in the event the boat is swamped. A transom drain hole with plug helps drain the deck with the boat on its trailer. The boat has a built-in 13-gal. gas tank and comes with a 12-volt trolling motor in the bow.

The hull is painted with a tough baked-on, 2-part urethane metallic finish that is very resistant to scratching and fading from exposure to sunlight. Color options are Firemetal Red or Gunmetal Blue, and graphics are also available. ...

Click here to read the rest of the article at JDPower.com