Grady-White 225 Dual Console Utica NY

The Grady-White 225 Dual Console is a very popular, good-selling model. The reason for its success is apparent after spending some time onboard""the versatile layout, enclosed head, excellent ride and handling, and a becoming economy of operation combine to make this a compelling family-friendly day boat.

ASI Environmental
(315) 735-1777
408 1st Street
Utica, NY
 
Utica Boat Service
(315) 736-5520
5164 Commercial Drive East
Yorkville, NY
 
Garret Gallery
(315) 853-8145
7825 State Route 5
Clinton, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Riverside Marine
(315) 337-5170
6787 Martin St
Rome, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Chenango Import Motors Inc
(315) 732-8711
71 N Genesee St
Utica, NY
 
Island Marine Canvas
(516) 825-3561
72 Rockaway Ave
Utica, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Bikes & Boards at Surf 'n Ski
(315) 768-1190
4480 Commercial Dr
New Hartford, NY
 
Bielejec Edward H
(315) 896-4421
8196 State Route 12
Barneveld, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Express Marine
(315) 337-5720
6787 Martin St
Rome, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

DDS Motorsports
(315) 792-4660
2100 Oriskany St W
Utica, NY
 

Grady-White 225 Dual Console

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Grady-White 225 Dual Console is a very popular, good-selling model. The reason for its success is apparent after spending some time onboard""the versatile layout, enclosed head, excellent ride and handling, and a becoming economy of operation combine to make this a compelling family-friendly day boat. The dual console arrangement makes the 225 DC well suited for both fishing and day cruising, and compared to its near cousin, the bowrider, it offers low maintenance, fishability and a self-bailing cockpit. The boat is easily trailerable behind a pickup or large SUV, with the whole rig coming in at around 4,800 lbs., plus any gear and fuel in the boat.

Construction
The Grady-White 225 Dual Console has a solid fiberglass hull bottom and hull sides with a supporting stringer and bulkhead system of pressure-treated plywood (which comes with a lifetime warranty) encapsulated in fiberglass. Limberholes are cut through solid glass to prevent water absorption into the core. Plywood is used to core the transom, which is also supported by aluminum bracing, and the decks and the hull-to-deck joint are sealed with a gasket and sealant and fastened with a mix of stainless screws and rivets. Foam injected in the voids between the hull and deck liner makes the boat unsinkable.

Hull Design
The Grady-White 225 Dual Console hull is a C. Raymond Hunt and Associates design. It has a deep entry and high chines forward that produce a smooth headsea ride and transitioning to approximately 20° of deadrise at the transom. A warped bottom, with deadrise decreasing gradually all the way to the transom (called SeaV2 by Grady-White), produces greater lift aft and a more level ride on plane, resulting in improved propulsion efficiency, compared to constant deadrise hulls, as well as improved sightlines ahead from the helm. Chine flats add lift and deflect spray on plane and form stability at rest.

Click here to read the rest of the article at JDPower.com