Peer Review: Analog Way Natix Ithaca NY

The Analog Way NatiX is very easy to control using the front control panel or RS232 via a Crestron control system. It's very simple to integrate into the entire project, and can also be controlled via TCP/IP and RS232 using software from Analog Way.

Rad-Tronics
(607) 273-8026
1922 Slaterville Rd
Ithaca, NY
 
Gallagher Tv Home Electronics
(607) 277-4903
225 S Fulton St
Ithaca, NY
 
Kwik Video Repair
(607) 277-2210
609 W Clinton St
Ithaca, NY
 
Radio Shack
(607) 277-3921
306 S Meadow St
Ithaca, NY
 
Hi-Way Hi-Fi
(607) 272-7155
707 Willow Ave
Ithaca, NY
 
Stellar Stereo
(607) 272-2644
702 Elmira Rd
Ithaca, NY
 
Time Liberators
(607) 277-0818
518 Dryden Rd
Ithaca, NY
 
Pleasant Valley Electric
(607) 272-6922
405 3rd St
Ithaca, NY
 
Ohm Electronics Incorporated
(607) 273-8406
609 W Clinton St
Ithaca, NY
 
Time Warner Cable
(607) 272-3456
519 W State St
Ithaca, NY
 

Peer Review: Analog Way Natix

Provided By:

Source: PRO AV Magazine
Publication date: December 1, 2005

By Robert Plant

My Pick:

Analog Way NatiX (NTX8022A) 8x2 high-resolution scaled native matrix, $9,995 MSRP

What I Like About It:

The Analog Way NatiX is very easy to control using the front control panel or RS232 via a Crestron control system. It's very simple to integrate into the entire project, and can also be controlled via TCP/IP and RS232 using software from Analog Way. This unit will take any input format — composite, S-video, component, or VGA — and send the scaled high-resolution output to either or both outputs. The transition of the switch is silky smooth with no sync issues. It also includes a really cool Hi-Resolution Logo inserter and frame store function.

I Would Change:

Any custom requirements can be engineered by adding other Analog Way products. For example, there's an option to add an SDTV “broadcast-quality” composite output to the NatiX. However, a “consumer-grade” composite video option that would be around the same cost as the Analog Way Power 1024s would also be nice. I think it would also be helpful if the unit had more than just two outputs, such as an 8x4, 8x8, or even as high as a 32x32 matrix.

Where I Used It:

I installed the NatiX at the Resort at Redhawk Events Center and Banquet Facility in Sparks, NV. This large, single-room facility, which is used for banquets, weddings, and corporate functions.

Click here to read full article from Pro AV Magazine