Photocopier Technologies Buffalo NY

A photocopier is an electronic machine designed to make reproductions of documents. The first photocopiers used an early process of making copies called xerography. This process, utilizing a dry powdered chemical called "toner," was introduced by Xerox in the 1960s. Xerography is still used in many modern copiers. In fact, the basic technology has changed very little in nearly 50 years.

Chakra Communications, Inc.
(716) 505-7300
644 Ellicott St
Buffalo, NY
 
Lynne Berg Design
(716) 884-8003
110 Cottage St.
Buffalo, NY
 
Quality Printing & Graphics
(716) 631-3866
247 Cayuga Road
Buffalo, NY
 
American Solutions for Business
716-83-5111 x 101
3290 Genesee St
Buffalo, NY
 
Western New York Family Magazine
(716) 836-3486
3147 Delaware Ave. Ste. B
Kenmore, NY
 
John Berg Illustration
(716) 884-8003
110 Cottage St.
Buffalo, NY
 
First Impressions Apparel, Inc
(716) 877-5220
278 Delaware Ave
Buffalo, NY
 
Innsbruck Printing & Mailins Services
(716) 668-6107
70 Innsbruck Drive
Buffalo , NY
 
Amherst Media
(716) 874-4450
175 Rano St. Ste. 200
Buffalo, NY
 
Custom Tee Activewear
(716) 876-9798
2320 Elmwood Ave
Kenmore, NY
 

Photocopier Technologies

Provided by:

Click here for more content from JDPower.com

A photocopier is an electronic machine designed to make reproductions of documents. The first photocopiers used an early process of making copies called xerography. This process, utilizing a dry powdered chemical called "toner," was introduced by Xerox in the 1960s. Xerography is still used in many modern copiers. In fact, the basic technology has changed very little in nearly 50 years.

Today, xerography faces challengers as laser and inkjet copiers become commonplace. Their technology offers less expensive and lower maintenance copy machines at consumer price levels.

Traditional Xerography
To duplicate a document, a photocopier uses a process that combines static electricity with a dry chemical called "toner." Toner is a powdered ink pigment bonded in plastic. When exposed to high heat, the plastic in the toner melts and releases the ink pigment to the paper.

To make a copy, a document is placed on a sheet of clear glass located above the lamp. When the process is started, the lamp (a bright fluorescent or incandescent light) is drawn across the glass to illuminate one strip of the document at a time. The light bounces off the document onto a special rotating drum that is coated in a light-sensitive material. The pattern of the reflected light on the drum becomes charged with static electricity.

The toner sticks to the pattern on the drum until the paper rolls over it. At that point, the toner is transferred to the surface of the paper. The paper, its surface now coated with powdered toner, is passed through a very hot fuser where the toner is permanently fused into the fibers of the paper creating a single copy. To make multiple copies, the entire process repeats itself again.

Click here to read the rest of the article at JDPower.com