RU-PA40D 40-watt Power Amp Ithaca NY

Radio Design Labs (RDL) has introduced the RU-PA40D 40-watt power amp with voltage-controlled amplifier (VCA), as well as the PM-2T pole mount tray in Ithaca. According to the company, the RU-PA40D is suited to applications where a high-quality, high-efficiency utility amplifier is necessary to drive a pair of 4-ohm or 8-ohm loudspeakers.

Radio Shack
(607) 277-3921
225 S Fulton St
Ithaca, NY
 
Ohm Electronics Incorporated
(607) 273-8406
609 W Clinton St
Ithaca, NY
 
Rent-A-Center
(607) 273-3636
313 3rd St
Ithaca, NY
 
Time Warner Cable
(607) 272-3456
519 W State St
Ithaca, NY
 
Best Buy
(607) 257-6824
40 Catherwood Rd
Ithaca, NY
 
Stellar Stereo
(607) 272-2644
702 Elmira Rd
Ithaca, NY
 
Direct 1 Satellite Tv
(607) 273-0658
212 N Tioga St
Ithaca, NY
 
Dltech Incorporated
(607) 266-6401
95 Brown Rd
Ithaca, NY
 
Rent-A-Center
(607) 277-2794
724 S Meadow St
Ithaca, NY
 
Pleasant Valley Electric
(607) 272-6922
405 3rd St
Ithaca, NY
 

RU-PA40D 40-watt Power Amp

Provided By:

Source: PRO AV News Service
Publication date: April 15, 2009

By Pro AV Staff

Radio Design Labs (RDL) has introduced the RU-PA40D 40-watt power amp with voltage-controlled amplifier (VCA), as well as the PM-2T pole mount tray.

According to the company, the RU-PA40D is suited to applications where a high-quality, high-efficiency utility amplifier is necessary to drive a pair of 4-ohm or 8-ohm loudspeakers. The output impedance is switch selectable on the front panel of the module, and the unit is specifically suited to amplification applications where users need to adjust the gain. Examples include projectors or monitors with fixed audio outputs used in classrooms, boardrooms, or video conferencing. The RU-PA40D is also suited to foreground amplification in small-to-medium rooms or in a specific zone within a retail space.

Equipped with an internal stereo VCA for setting the output level on both amplifier channels, the RU-PA40D also comes with a detachable terminal block, which allows connection of an external 10 kohm potentiometer or a 0-10 VDC control voltage. Remote control is possible with the RLC10K and RLC-10R remote controls, or via audio, control, or common computer network wire.

The PM-2T is a tray that mounts above a projector using a standard round projector pole or any smaller round or rectangular pole. The pole-mount tray accommodates any RDL RU, TX, or, STICK-ON audio power amplifier and its associated RDL power supply.

Click here to read full article from Pro AV Magazine