RU-PA40D 40-watt Power Amp Watertown NY

Radio Design Labs (RDL) has introduced the RU-PA40D 40-watt power amp with voltage-controlled amplifier (VCA), as well as the PM-2T pole mount tray in Watertown. According to the company, the RU-PA40D is suited to applications where a high-quality, high-efficiency utility amplifier is necessary to drive a pair of 4-ohm or 8-ohm loudspeakers.

Drs Technologies Incorporated
(315) 773-6344
2070 Hanger Access Dr
Fort Drum, NY
 
Radio Shack
(315) 788-1791
20951 Arsenal St # 139
Watertown, NY
 
Radio Shack
(315) 788-0673
1125 Arsenal St
Watertown, NY
 
Kama Communications Incorporated
(315) 782-5050
121 Franklin St
Watertown, NY
 
Dixons TV Sales & Svce
(315) 788-5398
515 E Main St
Watertown, NY
 
Raytheon
(315) 775-0541
4475 Camp Hale Rd
Fort Drum, NY
 
P & T Supply
(315) 782-6080
914 Water St
Watertown, NY
 
Radio Shack
(315) 788-2150
144 Eastern Blvd
Watertown, NY
 
Wayne's Tv Incorporated
(315) 782-4623
134 Court St
Watertown, NY
 
Time Warner Cable
(315) 782-5240
340 Eastern Blvd
Watertown, NY
 

RU-PA40D 40-watt Power Amp

Provided By:

Source: PRO AV News Service
Publication date: April 15, 2009

By Pro AV Staff

Radio Design Labs (RDL) has introduced the RU-PA40D 40-watt power amp with voltage-controlled amplifier (VCA), as well as the PM-2T pole mount tray.

According to the company, the RU-PA40D is suited to applications where a high-quality, high-efficiency utility amplifier is necessary to drive a pair of 4-ohm or 8-ohm loudspeakers. The output impedance is switch selectable on the front panel of the module, and the unit is specifically suited to amplification applications where users need to adjust the gain. Examples include projectors or monitors with fixed audio outputs used in classrooms, boardrooms, or video conferencing. The RU-PA40D is also suited to foreground amplification in small-to-medium rooms or in a specific zone within a retail space.

Equipped with an internal stereo VCA for setting the output level on both amplifier channels, the RU-PA40D also comes with a detachable terminal block, which allows connection of an external 10 kohm potentiometer or a 0-10 VDC control voltage. Remote control is possible with the RLC10K and RLC-10R remote controls, or via audio, control, or common computer network wire.

The PM-2T is a tray that mounts above a projector using a standard round projector pole or any smaller round or rectangular pole. The pole-mount tray accommodates any RDL RU, TX, or, STICK-ON audio power amplifier and its associated RDL power supply.

Click here to read full article from Pro AV Magazine