Ranger Z20 Comanche Bass Ithaca NY

The Ranger Z20 Comanche is one of four high-end, tournament-level, high-performance bass boats in Ranger's Comanche series. The Ranger is an able performer, with sure handling and capable of speeds to 70 mph.

Mc Pherson Sailing Products Inc
(607) 272-6944
730 Willow Ave
Ithaca, NY
Services
Parts, Aftermarket Accessories, Supplies, Storage

Johnsons Boat Yard
(607) 272-5191
101 Pier Rd
Ithaca, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Don Cooks Outboard Repair
(607) 533-7595
97 Armstrong Rd
Lansing, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Marine Trade Association Of Western N Y
(716) 284-1010
305 4Th St
Newfield, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Bear Creek Appaloosas
(315) 496-2092
Glen Cove Road
Moravia, NY
 
Midlakes Marine Storage Inc
(607) 277-6990
3041 Wilkins Rd
Ithaca, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Cayuga Wooden Boatworks
(607) 272-1581
435 Old Taughannock Boulevard
Ithaca, NY
 
H M Marine Tech International
(716) 298-5562
1575 Military Rd
Newfield, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Seveys Boatyard Inc
(315) 496-2092
6510 Glencove Rd
Moravia, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Dunham'S Marine
(607) 546-2121
5398 Peach Orchard Pt
Hector, NY
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Ranger Z20 Comanche Bass

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Ranger Z20 Comanche is one of four high-end, tournament-level, high-performance bass boats in Ranger's Comanche series. The Ranger is an able performer, with sure handling and capable of speeds to 70 mph. Designed for two anglers to fish comfortably at the same time on fore and aft casting decks, the Z20 is loaded with both storage space and fishing amenities, including a 2-compartment livewell, lockable rod storage and a high-capacity electric trolling motor with generous battery capacity.

Construction
The Ranger Z20 Comanche Bass hull starts off as a layer of gelcoat sprayed over a female mold. This is followed by a 3-oz., resin-rich layer of fiberglass chop that helps to prevent osmotic blistering on the bottom and cosmetic print-through of the fiberglass weave pattern on the hull sides. A series of fiberglass laminates follows to complete the hull skin. The hull is supported by a one-piece fiberglass longitudinal grid that is held precisely in place with a jig and fiberglassed to the hull. Holes are drilled and the hollow stringer system is filled with foam and sealed off""the closed-cell foam used throughout the hull, including inside the hollow stringers, deadens sound, stiffens the structure and makes the boat unsinkable. In fact, all Rangers are unsinkable, with foam used extensively throughout the structure to fill voids and create positive buoyancy even if the hull is damaged. The foam also adds stiffness to the hull skin, and makes the boat quieter, reducing wave noise transmitted through the hull. The transom is made up of multiple layers of fiberglass pultrusions bonded together and stiffened with heavy aluminum structural members. ...

Click here to read the rest of the article at JDPower.com