Testing In-Wall Compressive Strength Flushing NY

There are four methods in Flushing for determining the compressive strength of existing walls. The first is to remove a section from the wall and send it for laboratory testing per ASTM E 447.

Light Scaping Concepts Inc
917-599-7139 / 917-599-7901
65-23 Claran Ct
Maspeth, NY

Data Provided by:
Amber Freda Landscape Design
(646) 546-1592
Ny
Ny, NY

Data Provided by:
A Palmieri Landscaping Company, Inc
(914) 699-2257
6 Penn Place
Pelham Manor, NY

Data Provided by:
Limone Horticultural
(201) 836-6692
Teaneck, NJ
 
Skyline Landscapes
(212) 260-8950
New York, NY
 
Sustain Landscape Design
(718) 395-3567
300 Stuyvesant Avenue
Brooklyn, NY

Data Provided by:
Urban Plantscapes
(212) 351-5094
1607 Clinton Street
Hoboken, NJ

Data Provided by:
Ny Landscape Lighting
(914) 523-2578
245 Bronx River Road 3B
Yonkers, NY

Data Provided by:
Welcome To My Garden
(973) 886-4075
Glen Ridge, NJ

Data Provided by:
Perl
(212) 327-4470
225 Broadway Rm 304
New York, NY
 
Data Provided by:

Testing In-Wall Compressive Strength

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: October 1, 1992

Our firm is adding a partial second story to an old warehouse to convert it to an office building. The foundation and soil conditions make the project possible, but how can I determine the compressive strength of the existing masonry? How many areas should I test? What methods are most cost effective?
I know four methods for determining the compressive strength of existing walls. The first is to remove a section from the wall and send it for laboratory testing per ASTM E 447. There are some problems with this approach, however. Physically removing samples from the wall affects its appearance. Depending on the building's age, matching the color and texture of the masonry units removed may be nearly impossible. Also, samples may be damaged during removal or shipping, especially if the wall has multiple wythes. A second method is to make two vertical cuts entirely through the wall thickness and remove some of the masonry between these cuts. An in-place compression test can be performed using a hydraulic ram. As with the previous test method, the wall will be damaged by this testing and it may be difficult to perform in multi-wythe systems. Because the test is performed in place, however, samples will not be disturbed in shipping. The third method involves removing masonry units and samples of the mortar and estimating the compressive strength. The masonry units are tested in accordance with ASTM C 6...

Click here to read full article from Masonry Construction