Through-Wall Brick Ballston Spa NY
Round Lake, NY
mount vernon, NY
pavers ,masonry, walls ,tiles,curbs and much more
8 to 6
Prices and/or Promotions
starting at 8 a square feet
Source: Masonry Construction
Publication date: September 1, 1990
By Todd WatsonAbstract: Through-wall brick are called different names by different manufacturers. But they all have one thing in common: a finished surface on both faces. Hollow through-wall units must meet ASTM C 652; solid units must meet ASTM C 216. Generally, through-wall brick is a load-bearing brick larger than standard brick and used in a single-wythe wall. The walls usually are reinforced and grouted to increase tensile and shear strength. The nominal through-wall dimension is usually 4, 6, 8, 10, or 12 inches and the bricks can be up to 16 inches long. Hollow units have more than 25% cored area.LESS TIME AND MONEYArchitects specify through-wall brick for several reasons: low cost, high strength, quick construction, and a ready-made finish on both wall faces. Single-wythe brick walls go up fast because the units are larger and two wythes aren't needed.REINFORCING ADDS STRENGTHIn seismic areas and in areas with high winds, single-wythe brick walls must be reinforced and grouted. The ultimate strength of the wall depends on the grout, amount of rebar, and the compressive strength of the brickwork.
The full text of this article is available as a PDF document. To download the PDF version of the article, click here.
Click here to read full article from Masonry Construction