Through-Wall Brick East Amherst NY

Through-wall brick in East Amherst are called different names by different manufacturers. But they all have one thing in common: a finished surface on both faces.

E J Militello Concrete Inc
(716) 636-2288
6465 Transit Rd
East Amherst, NY
 
Ajax Smith, Inc.
(716) 877-1126
4000 River Rd.
Tonawanda, NY
 
Patriot Masonry & Construction,Inc.
(607) 988-6561
81 Willow St
Otego, NY
Services
Full Masonry & Construction services
Hours
M-F 8am-5pm

Cotumaccio Luigi Masonry Contrctng Co
(718) 776-2661
9071 198th St
Jamaica, NY
 
Schneid Construction
(315) 479-9004
210 6th St
Syracuse, NY
 
DM Padovano Construction
(716) 553-7447
320 Irvington Dr
Tonawanda, NY
 
Viau Constr Corp
(315) 472-0171
785 Erie Blvd W
Syracuse, NY
 
Summit Paving and Masonry
(631) 464-7054
30 Kelsey Ave
Huntington Station, NY
Services
Stone Masonry Construction, Masonry Construction, Masonry Services, Walkways, Drains, Hardscapes, Stone Steps, Masonry Company, Asphalt, Paving, Patios, Pools, Stamped Concrete, Pavers, Driveways, Masonry Work, Retaining Walls, Concrete Repair, Asphalt Repair, Paving Service, Masonry Service, Parking Lots, Overlays, Drainage Systems, Stoops, Waterfalls, Steps, Private Roads, Garage Slabs, Foundations, Excavation, Curbs, Stucco Work, Power Washing, Seal Coating
Hours
Open 7 days a week from 7:00am-7:30pm
Membership Organizations
Licensed, Insured, and Bonded.

J & C Masonry and Landscaping Inc.
(914) 941-8146
198 Spring Street
Ossining, NY
 
SLR Industries Inc.
(631) 893-3934
411 Broadway
West Babylon, NY
Services
Patios, Driveways, Walks, Pools
Hours
7am to 530pm

Through-Wall Brick

Provided By:

Source: Masonry Construction
Publication date: September 1, 1990

By Todd Watson

Abstract: Through-wall brick are called different names by different manufacturers. But they all have one thing in common: a finished surface on both faces. Hollow through-wall units must meet ASTM C 652; solid units must meet ASTM C 216. Generally, through-wall brick is a load-bearing brick larger than standard brick and used in a single-wythe wall. The walls usually are reinforced and grouted to increase tensile and shear strength. The nominal through-wall dimension is usually 4, 6, 8, 10, or 12 inches and the bricks can be up to 16 inches long. Hollow units have more than 25% cored area.LESS TIME AND MONEYArchitects specify through-wall brick for several reasons: low cost, high strength, quick construction, and a ready-made finish on both wall faces. Single-wythe brick walls go up fast because the units are larger and two wythes aren't needed.REINFORCING ADDS STRENGTHIn seismic areas and in areas with high winds, single-wythe brick walls must be reinforced and grouted. The ultimate strength of the wall depends on the grout, amount of rebar, and the compressive strength of the brickwork.

The full text of this article is available as a PDF document. To download the PDF version of the article, click here.

Click here to read full article from Masonry Construction