Through-Wall Brick Staten Island NY

Through-wall brick in Staten Island are called different names by different manufacturers. But they all have one thing in common: a finished surface on both faces.

E C Hufnagel Landscaping Inc
(201) 869-5680
51 Broad Ave Apt 1
Fairview, NJ
Services
Landscape Designers & Consultants, Patio Porch Deck & Gazebo Builders, Masonry Contractors, Deck Designers & Builders, Brick Walkways & Patios
Hours
Mon 08: 00 AM-06: 00 PM
Tue 08: 00 AM-06: 00 PM
Wed 08: 00 AM-06: 00 PM


Drew Masonry
(908) 289-4024
17 James Ave
Elizabeth, NJ
 
S & A Contractors
(908) 354-9557
207 Shelley Ave
Elizabeth, NJ
 
Willow Snow Removal
(201) 659-7266
67 Pollock Ave
Jersey City, NJ
 
Samson Stone Co Inc
(201) 656-2417
1000 Newark Ave
Jersey City, NJ
 
TONYS MASONRY
(917) 402-5202
262 wilson avenue
staten island, NY
Services
MASONRY SPECIALISTS

Ventura Masonry
(908) 289-0658
805 E Jersey St
Elizabeth, NJ
 
Willow Run Construction
(201) 659-7266
67 Pollock Ave
Jersey City, NJ
 
Ugolini Elio Mason Contractor
(201) 433-4304
213 Harrison Ave
Jersey City, NJ
 
Jameson Mark
(201) 386-1500
Hoboken Area
Jersey City, NJ
 

Through-Wall Brick

Provided By:

Source: Masonry Construction
Publication date: September 1, 1990

By Todd Watson

Abstract: Through-wall brick are called different names by different manufacturers. But they all have one thing in common: a finished surface on both faces. Hollow through-wall units must meet ASTM C 652; solid units must meet ASTM C 216. Generally, through-wall brick is a load-bearing brick larger than standard brick and used in a single-wythe wall. The walls usually are reinforced and grouted to increase tensile and shear strength. The nominal through-wall dimension is usually 4, 6, 8, 10, or 12 inches and the bricks can be up to 16 inches long. Hollow units have more than 25% cored area.LESS TIME AND MONEYArchitects specify through-wall brick for several reasons: low cost, high strength, quick construction, and a ready-made finish on both wall faces. Single-wythe brick walls go up fast because the units are larger and two wythes aren't needed.REINFORCING ADDS STRENGTHIn seismic areas and in areas with high winds, single-wythe brick walls must be reinforced and grouted. The ultimate strength of the wall depends on the grout, amount of rebar, and the compressive strength of the brickwork.

The full text of this article is available as a PDF document. To download the PDF version of the article, click here.

Click here to read full article from Masonry Construction